Ricmotech GTpro3 Gen-2 is a three-pedal set built on the Tilton 600 Series pedal frame, a cast aluminum platform originally designed for real-world motorsport applications. Pedal faces are adjustable both vertically and horizontally, with pivot points set back for heel clearance under heavy braking. The brake and clutch use a real automotive hydraulic master cylinder connected to a modified slave cylinder, with a stainless steel pressure sensor that reads actual hydraulic pressure rather than simulating it electronically. The brake is available in three load ranges of 45 kg (100 lbs), 80 kg (175 lbs), and 160 kg (350 lbs), with interchangeable resistance bushings for adjusting pedal firmness. Throttle uses a contactless Honeywell Hall-effect sensor rated for lifetime operation without wear, with adjustable throw and idle and full-throttle stops. A custom 16 MHz ECU performs up to 15,000 pedal reads per second, updating the connected PC at up to 1,000 times per second. Dead zones and linearity curves are adjustable per pedal without third-party software, and five setting profiles store directly in onboard EEPROM.